Setec BMPRO Drifter - Battery & Water Tank Management monitor

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Setec BMPRO Drifter - Battery & Water Tank Management monitor
  • Setec BMPRO Drifter - Battery & Water Tank Management monitor

Setec BMPRO Drifter - Battery & Water Tank Management monitor

Out stock

Water tank monitor on/off switch


Large LCD screen for day and night viewing


Low voltage warning


Clock and temperature gauge


USB charging port


Compatible with any 12V Lead Acid battery


2 year warranty

Regular Price: $599.00

Special Price $499.00

The Drifter is a high quality Australian made display unit that monitors a 12 Volt battery together with water tank levels. It is compatible with any deep cycle 12 Volt Lead-Acid battery including Valve-Regulated Lead-Acid (VRLA), Absorbed Glass Mat (AGM) and Gel batteries, as well as traditional non-sealed batteries. This device is permanently wired into your 12 Volt electrical system and continuously monitors battery voltage and charge/ discharge current. It uses this information, together with several parameters that are set by the user, to model battery behaviour and to estimate actual charge in the battery. The current drain of the unit is only 3 mA, which is much less than the normal selfdischarge of a battery.

Displays remaining time left in battery

Acts as a fuel gauge by monitoring and displaying information such as battery volts and amps, charge/discharge status, and remaining capacity

Water tank monitoring and pump on/off switch

Large LCD screen for day and night viewing

Low voltage warning

Clock and temperature gauge

Battery isolator

USB charging port

Safety standards

IEC 60950-1

IEC 61010-1

EMC standards

CISPR 11

EMS standards

ISO 7637-2

IEC 61000-4-2

2 year warranty

 

Voltage Measurement Range 8V to 15V

Shunt Resistance and

Current Range

1 mΩ ± 1%

± 100 A

Monitored Battery Capacity 7 Ah to 999 Ah

Visual Warning 11.0 V (Low Battery Voltage)

USB Charger Output 5.0 V ± 5%

0.9 A max, 1.2 A peak

Water Tank

Level Measurement

25 % increments

Clock 12 h (AM and PM indicator)

Ambient Temperature

Measurement

Yes

Temperature Display ºC or ºF

Back light Yes

GENERAL SPECIFICATION

Input Voltage 8 V to 15 V

Input Current 0.7 A max

Quiescent Current Drain < 3 mA

Fault Protection Reversed Battery Protection (Installation)

Operating Temperature 0 °C to 50 °C

Humidity Operating ≤ 85% RH non-condensing

Non-operating ≤ 95% RH non-condensing

Altitude Operating: 2000 m

Non-operating: 15000 m

MTBF 50000 hours at 40 °C

Dimensions 149 mm x 85 mm x 22 mm (LxHxW)

Weight 0.208 kg (unit only)

Approx. 1 kg boxed with accessories

Installation Wall mounted

Accessories Mounting Bracket, Current Shunt,

2 x water tank bungs sets, Cables

24 Months - Manufacturer