Matson 12v Dual Battery Isolator Kit with Programmable VSR MA98502

More Views

Matson 12v Dual Battery Isolator Kit with Programmable VSR MA98502

In stock

Isolates the 12V starting battery from the auxiliary battery


Suitable for 12V 4WD, marine, truck, caravan & camping applications


Automatic (VSR) Voltage Sensitive Relay rated at 150 Amps (Peak)


Surge & over current protection


Emergency over-ride connection


Over temperature protection


Easy to install


Not suitable for 24V applications


Kit contains all wiring components required to complete the job


 

Regular Price: $249.00

Special Price $180.00

The Matson Dual Battery Kit with programmable VSR is used to put two batteries or banks of batteries into parallel, once the primary battery or bank reaches a certain voltage. It’s perfect for 4x4 applications, where a secondary battery is used for accessories (lights, fridges or winches). It is important for you to protect the vehicles starting battery from being flattened by the accessories. By installing the MPVSR between the starting battery and the secondary battery, can put the batteries in parallel once the starting battery is charged, or reaches a user defined voltage. This allows charging of both batteries to occur while the vehicle is driving. However, if a load is placed on the batteries whilst in parallel, and the starting battery drops to a pre-determined voltage, the MPVSR will disconnect the two batteries, which allows for the secondary battery to power the accessories while protecting the starting battery.

Contents:

1 x Matson Programmable Voltage Sensitive Relay (MPVSR)

1 x 6 metre length of 10mm sq red cable lugged at both ends

1 x 61cm (24”) black earth cable

2 x Positive marine type battery terminals

1 x Negative marine type battery terminal

2 x Copper crimp lugs

2 x Red heat shrink

1 x MA4-6 Lug

2 x MA6-8 Lug

1 x Remote switch

3 x Fork lug - FS5.5

2 metres of 4mm cable (Red)

600mm of 4mm cable (Black)

Isolates the 12V starting battery from the auxiliary battery

Suitable for 12V 4WD, marine, truck, caravan & camping applications

Automatic (VSR) Voltage Sensitive Relay rated at 150 Amps (Peak)

Surge & over current protection

Emergency over-ride connection

Over temperature protection

Easy to install

Not suitable for 24V applications

Kit contains all wiring components required to complete the job

 

12 Months - Manufacturer

1 x Matson Programmable Voltage Sensitive Relay (MPVSR)

1 x 6 metre length of 10mm sq red cable lugged at both ends

1 x 61cm (24”) black earth cable

2 x Positive marine type battery terminals

1 x Negative marine type battery terminal

2 x Copper crimp lugs

2 x Red heat shrink

1 x MA4-6 Lug

2 x MA6-8 Lug

1 x Remote switch

3 x Fork lug - FS5.5

2 metres of 4mm cable (Red)

600mm of 4mm cable (Black)